Skip to content

Technology | People | Progress A Brighter Tomorrow

Get in Touch
Abstract graphic of a signal radiating outward in the Logic Networks colours, introducing the article on office wireless coverage

November 12, 2026

Wi-Fi that works in a building with thick walls

Victorian schools, converted mills, churches, listed offices and anything with solid masonry all share the same wireless problem. The signal is fine in the room it is in and unusable through the next wall.

The instinct is to turn the power up. That makes things worse, and here is why.

Why more power is the wrong answer

Wireless is a conversation, not a broadcast. The access point may be able to shout across the building, but the phone in somebody’s pocket cannot shout back. Turning up one end produces a device that can hear the network and cannot be heard by it, which looks like a connection that exists and does nothing.

Turning the power up also makes access points interfere with each other, so a building with several of them gets slower rather than faster.

The right answer is almost always the opposite: more access points, each running at modest power, each covering a smaller area well.

Coverage is a cabling job

Every access point needs a cable. That cable carries the data and usually the power, which means no separate socket at ceiling height.

This is why wireless projects in old buildings are mostly about routes rather than radios. Where can cable run, what is listed, which walls can be drilled, and where does it come back to.

Budget accordingly. In a difficult building the cabling is frequently the larger part of the cost, and a quotation that does not mention it is not a complete quotation.

Six cards: More points less power, Cable to each one, Survey do not guess, Split the bands, Name it once, Separate the guests

Survey the real building

A plan drawn from a floor plan assumes walls are all the same. In a solid building they are not: a stud partition and a load bearing wall are entirely different obstacles, and so are a metal lift shaft and a plasterboard corridor.

A survey walks the building with measuring equipment and records what actually happens, with the doors where they normally are and the furniture in place.

Do it before ordering anything. The survey usually changes the number of access points in one direction or the other, and it is far cheaper than finding out afterwards.

The settings that matter more than the hardware

Once the access points are in the right places, a few choices do most of the remaining work.

What to check when somebody says it is slow

Ask three questions before touching the wireless. Where were they standing, what were they doing, and does it happen on a cable in the same room.

If it is slow on a cable too, it is not the wireless. That one question saves a great deal of work, and it comes up more often than people expect, because the internet connection or a busy server looks exactly like poor coverage from a desk.

Count devices, not people

Coverage and capacity are different problems, and a building can pass one while failing the other.

Capacity is about how many devices are asking at once. A meeting room with fifteen people may have forty devices in it, because phones and watches join too. A classroom with thirty pupils on tablets is a heavier load than an open plan office with sixty staff on laptops, because everybody in the classroom does the same thing at the same moment.

Count the busiest realistic case for each space, not the average across the building. That number, more than the floor area, decides how many access points a room needs.

What good looks like afterwards

Coverage everywhere people actually work, including the awkward corner and the room at the end. Devices that move through the building without dropping the connection. Enough capacity for the busiest room rather than the average one, which for a school means a full class on devices at once.

And a record of where each access point is and what it is called, so the next fault does not start with a search.

We survey and install this work, including in listed and difficult buildings. There is more on our networks and infrastructure page, and the education side is on our education page. If a particular part of your building has never worked, describe it to us and we will say what we would measure.